Three new Siemens SGT400 Turbine for sale

The Siemens SGT400 gas turbine is a twin-shaft, industrial gas turbine used primarily for power generation applications. The model referenced, SGT-400 DLE, was manufactured in 2014 and is designed to operate at a frequency of 60 Hz.

The SGT400 gas turbine has a power output of 12.90 MW (megawatts) and an electrical efficiency of 34.8%, meaning that it can convert 34.8% of the fuel's energy into electrical power. The heat rate, which is a measure of the turbine's fuel efficiency, is 10,355 kJ/kWh at full load, or 9,815 Btu/kWh.

The compressor pressure ratio of the SGT400 is 16.8:1, which means that the compressor is capable of compressing the air entering the turbine to 16.8 times its original pressure.

In terms of emissions, the SGT400 gas turbine is designed to meet strict environmental regulations. It typically emits NOx (nitrogen oxides) of less than 15 ppmV (parts per million by volume) and CO (carbon monoxide) of less than 10 ppmV (corrected to 15% O2 dry). This is achieved through the use of advanced emissions control technology, such as dry low emissions (DLE) combustion systems.

The Siemens SGT (formerly known as "Siemens Industrial Turbomachinery") series of gas turbines includes several models for various power generation applications:

• SGT-100: small industrial turbine for simple cycle or cogeneration applications.
• SGT-200: small industrial turbine for simple cycle or cogeneration applications.
• SGT-300: industrial turbine for simple cycle or combined cycle power generation.
• SGT-400: industrial turbine for simple cycle or combined cycle power generation, with power output ranging from 40 to 50 MW.
• SGT-500: industrial turbine for combined cycle power generation, with power output up to 320 MW.
• SGT-600: industrial turbine for combined cycle power generation, with power output up to 50 MW.
• SGT-700: industrial turbine for combined cycle power generation, with power output up to 80 MW.
• SGT-800: industrial turbine for combined cycle power generation, with power output up to 150 MW.
• SGT-A45 TR: aeroderivative turbine for mobile and temporary power generation, with power output up to 43 MW.

Each model in the series is designed for high efficiency, low emissions, and fast start-up times, and may have different features and specifications for specific applications.