Triogen ORC turbine of 160 kW electrical and about 700 kW thermal

Triogen ORC turbine of 160 kW electrical and about 700 kW thermal

used very little (max 4000 hours) and are in excellent condition.

ORC turbine of 160 kW electrical and about 700 kW thermal, 

Since 2001, Triogen has been developing and manufacturing systems for conversion

Organic Rankine Cycle (ORC) energy conversion systems. The generator

TRIOGEN ORC, which has been used in various application areas since

since 2005, is similar to a steam cycle, but uses a fluid

organic instead of water. Compared with steam, it allows

to achieve better performance and efficiencies by exploiting sources

of low-temperature heat. The Triogen ORC generator is

suitable for the conversion of heat from:

+ Natural gas engines

+ Biogas engines

+ Landfill gas engines

+ Biomass

+ Biodiesel engines

+ Diesel engines

+ Gas from flares

+ Gas turbines

+ Process heat

+ Furnace heat

+ Any heat source >350 °C

165 kWe DI

ELECTRICITY

WITHOUT FUEL

AND EMISSION-FREE

Power generation from waste heat

waste heat is sustainable because it generates

energy without the use of fuel

and without emissions, converting resources

that would otherwise be wasted.

+ Powers between 60 and 165 kWe.

+ Suitable for waste heat at temperatu-

high temperature (>350 °C)

+ Does not require an intermediate circuit

(oil- or water-fired)

+ Zero emissions, CO2 neutral

+ Unlimited range of application (sources of

heat)

+ Suitable for various cogeneration schemes

+ High degree of energy conversion.

ca, up to 20% of each workload

+ Low maintenance requirements

+ High reliability/availability

(> 97% measured)

+ High hours of operation

(> 8000 hours/year)

+ No need for an operator,

remote control

+ Suitable for access to incentives for

renewable energy

165

SYSTEM

TEMP. HEAT SOURCE INPUT > 350 °C

HEAT SOURCE 450 - 900 KWth

WATER COOLING 350 - 700 KWth

TEMP. COOLING 35 °C - > 55 °C (UP TO 90 °C, OPTIONAL)

CONTROL MANAGEMENT CONTROL

COMPUTERIZED

REMOTE MONITORING INTERNET TCP / IP

UNMANNED / REMOTE MANAGEMENT

PROCESS CHAMBER FOR OUTDOOR INSTALLATION,

IP 55/UVA PROTECTED;

STANDARD SIZE FOR WHEELED TRANSPORT

COMPONENTS

DIRECT EVAPORATION EVAPORATOR, WITHOUT CIRCUIT

INTERMEDIATE

GENERATOR HIGH-SPEED ASYNCHRONOUS MOTOR

SINGLE STAGE TURBINE 18000-28000 rpm

HYDRODYNAMICALLY LUBRICATED BEARINGS

TOLUENE LUBRICANT

PERFORMANCE

ELECTRIC POWER 60 - 165 kWe

ELECTRICAL CONNECTION 50 Hz, 400 V, three-phase

ZERO EMISSIONS.

MCC PROCESS CHAMBER DIMENSIONS

LENGTH 3.2 m 1.2 m

WIDTH 2.4 m 1.6 m

HEIGHT 4 m 2.2 m

WEIGHT 12,000 kg 2,000 kg